EUROPEAN STANDARD TECHNOLOGY
MAIN VESSEL
- The parts of the machine in contact with the process liquor are manufactured from acid-resistant 316L quality stainless steel.
- Locking security by pnematic piston (Activates under conditions above 80 C temperature)
- Mechanical lock working with vessel internal pressure impact.
- Observing window with stainless metal grid. (High tempered window glass resistant for higher temperature)
- LED day light lighting system inside the main body.
- Internal main body washing system
- Main-hole entrance.
- Main body pressure release system; pneumatic on/off high pressure release valve.
- HT drains system (drain under pressure).
- Seam detection and cycle control system
- Possibility to measure the total water consumption and consumption per kg product.
MAIN WINCH SYSTEM
- Main winch system which pervents crease marks and pilling problems by working with minimum slipage.
- Mechanical seal to avoid leakage.
- Belt pulley mechanism main winch drive system.
- Winch top intervention cover.
- Main winch drive motor.
- 0-450 m/min inverter controlled speed adjustment.
- Rapid unloading by unloading winch and maintenance platform.
- Unloading winch with a platform which provides an easy way to reach the winches.
ELECTRO-VARIO ADJUSTABLE NOZZLE SYSTEM
- Eliminates crease marks and prevents uneven dyeing problems with a maximum penetration for the fabric.
- Nozzle structure is circular with a diameter of 220 mm.
- Nozzle adjustment range is 4-14 mm. Complete adjustment can be done (%0-100% range)
- Nozzle adjustment range (0.4-1.5) bar g
J-BOX
- J-Box side walls are perforated stainless steel; bottom side with Teflon sheet mounted.
- Special designed J-box system to increase the performance of fabric flow through the front.
MAIN VESSEL HEAT EXCHANGER
- Single pass manufactuered form 316L stainless steel pipe.
- Heating gradient from 30 C TO 80 C; for 50 C temperature increase 0.5 - 5 C / min (steam pressure 6 bar g)
- Condensate return on/off valve.
- Cooling gradiant 0.5 - 3.5 C/min
- Proportional Heating / Cooling valve.
- Heat-exchanger steam side design pressure: 8.4 bar g (175 C), process liquid side design pressure 2:3 bar g (135 C)
MACHINE MAIN CIRCULATION PUMP
- Working with low liquor ratio with in-line centrifuge type pump
- Inverter controlled flow adjustment by AC - 4 pole electrical motor.
- Mechanical Seal to avoid leakage
All rights reserved. Website Designed & Maintained by GRAPHIC PARK TECHNOLOGIES